Brocade Network OS Command Reference v4.1.0 - Manual (Page 238)

200 Network OS Command Reference
53-1003115-01
debug vrrp
2
debug vrrp
Enables debugging for the Virtual Router Redundancy Protocol (VRRP).
Synopsis debug vrrp all
debug vrrp events
debug vrrp packets {interface {port-channel number | fortygigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}|ve vlan_id
[recv | sent]}
debug vrrp session VRID
no debug vrrp all
no debug vrrp events
no debug vrrp packets {interface {port-channel number |
fortygigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port}| recv | sent}
no debug vrrp session VRID
Operands all Debugs all VRRP events, packets, and sessions.
events Debugs all VRRP events.
packets interface Debugs packets for an interface that you specify. Also enables the recv and
sent parameters.
port-channel number
Specifies the port-channel interface. Valid values range from 1 through 63.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet port interface.
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.