Brocade Network OS Command Reference v4.1.0 - Manual (Page 1192)

1154 Network OS Command Reference
53-1003115-01
show running-config nas server-ip
2
show running-config nas server-ip
Displays information about the specified Auto NAS (automatic network attached storage) interface.
Synopsis show running-config nas server-ip {gigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | fortygigabitethernet rbridge-id/slot/port}}
Operands gigabitethernet Selects a 1-GbE interface.
tengigabitethernet Selects a 10-GbE interface.
fortygigabitethernet Selects a 40-GbE interface.
rbridge-id/slot/port
Selects the RBridge ID, slot, and port of the respective interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about the specified Auto NAS interface.
Usage Guidelines This command is supported only on Brocade VDX 8770-4, VDX 8770-8, VDX 6740, and VDX 6740T
switches.
Examples To display information about the 10 GbE Auto NAS interface 4/1/5:
switch0# show running-config nas server-ip tengigabitethernet 4/1/5
NAS Traffic
matches 2000000 packets 40000000 bytes
See Also auto-qos enable, clear nas statistics, nas auto-qos, nasport server-ip, show nas statistics,
show system internal nas, show cee maps