Brocade Network OS Command Reference v4.1.0 - Manual (Page 1232)

1194 Network OS Command Reference
53-1003115-01
show udld interface
2
show udld interface
Shows UDLD information for interfaces.
Synopsis show udld interface [{fortygigabitethernet rbridge-id/slot/port | gigabitethernet
rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}]
Operands fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface for showing UDLD
information.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface for showing UDLD information.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface for showing UDLD
information.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Shows unidirectional link detection (UDLD) protocol information for one or all ports.
Usage Guidelines The following describes the values that appear in the headings for this command.
Description UDLD headings
Heading Description
State Describes if UDLD is enable or disabled.
Mode Describes if the mode is Receive, Transmit, or
Both (Transmit/Receive).
Advertise Transmitted Describes how often the advertisement is
transmitted.
Hold time for advertise Describes the hold time for receiving devices
before discarding.
Re-init Delay Timer The timer for the reinitializing delay
Tx Delay Timer The timer for transmission