Brocade Network OS Command Reference v4.1.0 - Manual (Page 1163)

Network OS Command Reference 1125
53-1003115-01
show running-config secpolicy
2
show running-config secpolicy
Displays the Switch Connection Control (SCC) security policy information.
Synopsis show running-config [rbridge-id {rbridge-id | all}] secpolicy {defined-policy | active-policy}
Operands defined-policy Displays the defined policy and its policy member set.
active-policy Displays the active policy and its policy member set.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
all Specifies all identifiers for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the active policy and the defined policy and its policy member set.
Usage Guidelines The rbridge-id operand is supported in VCS mode only.
Examples Standalone mode
To show only the defined policy:
switch# show running-config secpolicy defined-policy
secpolicy defined-policy SCC_POLICY
member-entry 11:11:11:11:11:11:11:11
!
member-entry 22:22:22:22:22:22:22:22
!
member-entry 33:33:33:33:33:33:33:33
To show only the active policy:
switch# show running-config secpolicy active-policy
secpolicy active-policy SCC_POLICY
member-entry 11:11:11:11:11:11:11:11
!
member-entry 22:22:22:22:22:22:22:22
!
member-entry 33:33:33:33:33:33:33:33
To show both active and defined policies:
switch# show running-config secpolicy
secpolicy defined-policy SCC_POLICY
member-entry 11:11:11:11:11:11:11:11
!
member-entry 22:22:22:22:22:22:22:22
!
member-entry 33:33:33:33:33:33:33:33
!
!
secpolicy active-policy SCC_POLICY
member-entry 11:11:11:11:11:11:11:11