Port-profile-domain – Brocade Network OS Command Reference v4.1.0 User Manual

Page 584

546

Network OS Command Reference

53-1003115-01

port-profile-domain

Creates an Automatic Migration of Port Profiles (AMPP) port-profile domain that contains all of the
port-profiles that can be applied to a profiled port in a Virtual Fabrics context.

Synopsis

port-profile-domain port-profile-domain-name

no port-profile-domain port-profile-domain-name

Operands

port-profile-domain-name

A fabric-wide unique name of a port-profile domain. The range is from 1
through 128 ASCII characters.

Defaults

None

Command Modes

Global configuration mode

Description

Use this command to create an AMPP port-profile domain that contains all of the port-profiles that
can be applied to a profiled port in a Virtual Fabrics context.

Usage Guidelines

Within this domain, a service or transport VF (VLAN ID > 4095) must not have overlapping 802.1Q
classification tags.

Enter no port-profile-domain port-profile-domain-name to delete a port-profile domain.

Use the port-profile-port command to associate a profiled port to a port-profile domain.

Examples

Creating a port-profile domain:

switch(config)# port-profile-domain my_PP_domain

Adding profiles to the above domain:

switch(config-port-profile-domain-my_PP_domain)# port-profile my_PP_domain_2

switch(config-port-profile-domain-my_PP_domain)# port-profile my_PP_domain_3