Brocade Network OS Command Reference v4.1.0 - Manual (Page 971)

Network OS Command Reference 933
53-1003115-01
show name-server zonemember
2
show name-server zonemember
Displays the local name server (NS) zoning information.
Synopsis show name-server zonemember {PID pid | WWN wwn}
Operands PID pid Specifies the Fibre Channel address of the device.
WWN wwn Specifies the World Wide Name (WWN) of the device.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display detailed local name server (NS) information about all devices zoned
with the specified device. The lookup is performed using either the Fibre Channel address (Port ID,
or PID), or the WWN of the device.
Usage Guidelines If no information is available for the device, the command displays one of the following messages:
• For PID lookup: Device with PID of pid does not exist
• For WWN lookup: Device with WWN of wwn does not exist
Examples To view name server information for a device specified by PID:
switch# show name-server zonemember pid 0x010500
PID: 010500
Port Name: 10:00:00:05:1F:ED:95:38
Node Name: 20:00:00:05:1F:ED:95:38
SCR: 3
FC4s: FCP
PortSymb: [27] "Brocade-1020|2.3.0.0|localhost.localdomain|Red Hat
Enterprise Linux Server release 5.5"
NodeSymb: NULL
Fabric Port Name: 20:21:00:05:1F:ED:79:7A
Permanent Port Name: 10:00:00:05:1F:ED:95:38
Device type: Physical Initiator
Interface: Fcoe 1/1/5
Physical Interface: Te 1/0/5
Share Area: No
Redirect: No
PID: 010600
Port Name: 10:00:00:05:1F:CD:95:38
Node Name: 20:00:00:05:1F:CD:95:38
SCR: 3
FC4s: FCP
PortSymb: [27] "Brocade-1020|2.3.0.0|localhost.localdomain|Red Hat
Enterprise Linux Server release 5.5"
NodeSymb: NULL
Fabric Port Name: 20:21:00:05:1E:CD:79:7A
Permanent Port Name: 10:00:00:05:1E:CD:95:38
Device type: Physical Initiator
Interface: Fcoe 1/1/6
Physical Interface: Te 1/0/6
Share Area: No
Redirect: No