Brocade Network OS Command Reference v4.1.0 - Manual (Page 1254)

1216 Network OS Command Reference
53-1003115-01
show zoning enabled-configuration
2
show zoning enabled-configuration
Displays information about the enabled zoning configuration.
Synopsis show zoning enabled-configuration
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the cfg-name and enabled-zone fields of the enabled zoning
configuration for a Brocade VCS Fabric.
Usage Guidelines This command is supported in VCS Fabric mode. Zoning configuration data are automatically
distributed among all RBridges in the VCS Fabric. Standalone mode is not supported.
This command can be entered on any RBridge in a Brocade VCS Fabric.
Examples
switch# show zoning enabled-configuration
zoning enabled-configuration cfg-name cfg1
zoning enabled-configuration enabled-zone zone1
member-entry 10:00:00:00:00:00:00:01
zoning enabled-configuration enabled-zone zone2
member-entry 10:00:00:00:00:00:00:02
switch# show zoning enabled-configuration | count
Count: 8 lines
See Also show running-config zoning defined-configuration,
show running-config zoning enabled-configuration