Brocade Network OS Command Reference v4.1.0 - Manual (Page 886)

848 Network OS Command Reference
53-1003115-01
show ip bgp routes longer-prefixes
2
show ip bgp routes longer-prefixes
Displays BGP4 route information that is filtered for a specific prefix and mask, as well as for
prefixes with a longer mask than the one specified.
Synopsis show ip bgp routes ip-addr/prefix [longer-prefixes | ip-addr] [rbridge-id rbridge-id]
Operands ip-addr IPv4 address in dotted-decimal notation.
prefix Mask length in CIDR notation.
longer-prefixes Filters on prefixes equal to or greater than that specified by the mask.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view BGP4 route information for a specific prefix with a mask longer than or
equal to the mask specified in the command.
Usage Guidelines None
Examples To view BGP4 route information filtered by longer prefixes:
switch# show ip bgp routes 10.11.12.12/23 longer-prefixes
See Also None