Brocade Network OS Command Reference v4.1.0 - Manual (Page 778)

740 Network OS Command Reference
53-1003115-01
show dot1x diagnostics interface
2
show dot1x diagnostics interface
Displays all diagnostics information for the authenticator associated with a port.
Synopsis show dot1x diagnostics interface [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display all diagnostics information for the authenticator associated with a
port.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples To display all diagnostics information for the authenticator associated with a port:
switch# show dot1x diagnostics interface tengigabitethernet 5/0/16
802.1X Diagnostics for interface te5/0/16
authEnterConnecting: 0
authEaplogoffWhileConnecting: 1
authEnterAuthenticating: 0
authSuccessWhileAuthenticating: 0
authTimeoutWhileAuthenticating: 0
authFailWhileAuthenticating: 0
authEapstartWhileAuthenticating: 0
authEaplogoggWhileAuthenticating: 0
authReauthsWhileAuthenticated: 0
authEapstartWhileAuthenticated: 0
authEaplogoffWhileAuthenticated: 0
BackendResponses: 0
BackendAccessChallenges: 0
BackendOtherrequestToSupplicant: 0
BackendAuthSuccess: 0
BackendAuthFails: 0
See Also None