Brocade Network OS Command Reference v4.1.0 - Manual (Page 234)

196 Network OS Command Reference
53-1003115-01
debug lldp dump
2
debug lldp dump
Dumps the Link Layer Discovery Protocol (LLDP) data to the console.
Synopsis debug lldp dump {all | [interface fortygigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port]}
Operands all Turns on LLDP packet debugging on all interfaces.
interface Use this parameter to specify the interface to be monitored.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to dump Link Layer Discovery Protocol (LLDP) to the console.
Usage Guidelines None
Examples None
See Also show debug lldp