Brocade Network OS Command Reference v4.1.0 - Manual (Page 901)

Network OS Command Reference 863
53-1003115-01
show ip igmp snooping
2
show ip igmp snooping
Displays IGMP snooping information.
Synopsis show ip igmp snooping [interface vlan vlan_id | mrouter interface vlan vlan_id]
Operands interface vlan vlan_id
Specifies which VLAN interface to display the snooping configuration
related information. Refer to the Usage Guidelines.
mrouter interface vlan vlan_id
Specifies which VLAN interface to display the snooping configuration
related information. Refer to the Usage Guidelines.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display IGMP snooping information, display multicast router port related
information for the specified VLAN, or to display snooping statistics for the specified VLAN in the
IGMP protocol module.
Usage Guidelines On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs are
as follows:
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANS (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Examples To display IGMP snooping information for VLAN 5:
switch# show ip igmp snooping interface vlan 5
See Also None