Brocade Network OS Command Reference v4.1.0 - Manual (Page 286)

248 Network OS Command Reference
53-1003115-01
dscp-cos
2
dscp-cos
Specifies a user-defined mutation-map to be used on the port.
Synopsis dscp-cos map_name
Operands map_name The user-defined map-name.
Defaults None
Command Modes Policy-map configuration mode
Description Use this command to specify a user-defined mutation-map to be used on the port.
Usage Guidelines This command is allowed only for the Ingress direction.
This command can only be configured in for the class class-default command.
This command can lead to a possible contradiction if there are other user-defined classes used in
the same policy-map which has a set CoS action configured. In this case, defined CoS takes
priority over the mutation map.
Examples Typical command example:
switch(config)# policy-map mutation
switch(config-policymap)# class class-default
switch(config-policyclass)# dscp-cos plsmap
See Also class, policy-map