Firmware recover – Brocade Network OS Command Reference v4.1.0 User Manual

Page 346

308

Network OS Command Reference

53-1003115-01

firmware recover

Recovers the previous firmware version on the switch nodes if a firmware upgrade was
unsuccessful.

Synopsis

firmware recover [rbridge-id {rbridge-id_1-rbridge-id_3, rbridge-id_5 | all}]

Operands

rbridge-id

Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.

rbridge-id

Specifies a unique identifier for a node. Values can be a range of nodes or
individual nodes and are separated by a comma.

all

Specifies all identifiers for a node. The command applies to all of the
nodes. The command applies to all of the nodes.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Allows you to undo the operation that was performed using the firmware download “noactivate”
option.

If you invoke a noactivate firmware download, the firmware is loaded to the secondary node
without swapping partitions. If firmware recover is executed, it will perform a forceful commit in
that node. This CLI does not reboot the node.

Usage Guidelines

The rbridge-id operand is supported in VCS mode only.

Examples

To recover firmware on switch nodes 1, 2, 3, and 5:

switch# firmware recover rbridge-id rid1-rid3,rid5

To perform a firmware recovery on all switch nodes:

switch# firmware recover rbridge-id all