Brocade Network OS Command Reference v4.1.0 - Manual (Page 1079)

Network OS Command Reference 1041
53-1003115-01
show running-config interface gigabitethernet lacp
2
show running-config interface gigabitethernet lacp
Displays interface configuration parameters for the Link Aggregation Control Protocol (LACP) for a
1-gigabit Ethernet interface.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] lacp [timeout]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
timeout Indicates whether the interface timeout is short (for Brocade trunks) or long
(for standard trunks).
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display LACP settings for the specified interface.
Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples None
See Also lacp timeout