Brocade Network OS Command Reference v4.1.0 - Manual (Page 1116)

1078 Network OS Command Reference
53-1003115-01
show running-config interface vlan
2
show running-config interface vlan
Displays the status of VLAN interfaces.
Synopsis show running-config interface vlan [vlan_id] [arp-ageing-timeout | description | ip | mac
access-group | shutdown | spanning-tree]
Operands vlan_id Specifies a VLAN. Refer to the Usage Guidelines.
arp-ageing-timeout Displays the configured interface timeout value in minutes for the Address
Resolution Protocol (ARP) for VLANs.
description Displays the description text entered for each VLAN or for the specified
VLAN.
ip Displays IP configuration information for VLANs.
mac access-group Displays MAC ACLs configured for VLANs.
shutdown Specifies whether the VLAN interface is enabled.
spanning-tree Displays spanning tree configuration information for VLANs.
Defaults Displays the configuration of all VLAN interfaces on the local switch.
Command Modes Privileged EXEC mode
Description Use this command to display the configuration of VLAN interfaces.
Usage Guidelines On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Examples None
See Also interface, show running-config interface vlan ip