Show name-server nodefind – Brocade Network OS Command Reference v4.1.0 User Manual

Page 970

932

Network OS Command Reference

53-1003115-01

show name-server nodefind

Displays the local name server (NS) information for a specific device.

Synopsis

show name-server nodefind {PID pid | WWN wwn}

Operands

PID pid

Specifies the Fibre Channel address of the device to search for.

WWN wwn

Specifies the World Wide Name (WWN) of the device to search for.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display local name server (NS) information about a specific detailed entry.

The lookup is performed using either the Fibre Channel address (Port ID, or PID), or the WWN of
the device. If no information is available for the device, the command displays one of the following
messages:

•

For PID lookup:

Device with PID of pid does not exist

•

For WWN lookup:

Device with WWN of wwn does not exist

Refer to show name-server detail for descriptions of the displayed information.

Usage Guidelines

None

Examples

To view name server information for a device specified by PID:

switch# show name-server nodefind pid 0x012100

PID: 012100

Port Name: 10:00:00:05:1E:ED:95:38

Node Name: 20:00:00:05:1E:ED:95:38

SCR: 3

FC4s: FCP

PortSymb: [27] "Brocade-1020|2.3.0.0|localhost.localdomain|Red Hat

Enterprise Linux Server release 5.5"

NodeSymb: NULL

Fabric Port Name: 20:21:00:05:1E:CD:79:7A

Permanent Port Name: 10:00:00:05:1E:ED:95:38

Device type: Physical Initiator

Interface: Fcoe 1/1/9

Physical Interface: Te 1/0/9

Share Area: No

Redirect: No