Brocade Network OS Command Reference v4.1.0 - Manual (Page 1218)

1180 Network OS Command Reference
53-1003115-01
show startup-config
2
show startup-config
Displays the contents of the startup configuration.
Synopsis show startup-config
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the contents of the startup configuration.
Usage Guidelines This command is supported only on the local switch.
Examples To display the startup configuration:
switch# show startup-config
chassis virtual-ip 10.24.73.50/20
no diag post enable
linecard 2 LC48x10G
linecard 4 LC48x10G
class-map default
match any
!
logging rbridge-id 1
raslog console INFO
!
logging auditlog class SECURITY
logging auditlog class CONFIGURATION
logging auditlog class FIRMWARE
logging syslog-facility local LOG_LOCAL7
switch-attributes 1
chassis-name VDX8770-4
host-name sw0
!
support rbridge-id 1
ffdc
!
snmp-server contact "Field Support."
snmp-server location "End User Premise."
snmp-server sys-descr "Brocade VDX Switch."
snmp-server community ConvergedNetwork
snmp-server community OrigEquipMfr rw
snmp-server community "Secret C0de" rw
snmp-server community common!
(output truncated)
See Also show running-config, show startup-db