Brocade Network OS Command Reference v4.1.0 - Manual (Page 1015)

Network OS Command Reference 977
53-1003115-01
show rbridge-id
2
show rbridge-id
Displays the RBridge ID of each node that is configured in a Virtual Cluster Switching (VCS) cluster.
Synopsis show rbridge-id [swbd-number int | chassis {virtual-ip}
Operands swbd-number Selects a switch type.
int One or more integers (including a decimal) that identifies a switch type.
chassis virtual-ip Displays virtual IP addresses if configured
Defaults None
Command Modes Privileged EXEC configuration mode
Description Use this command to view the RBridge IDs of configured nodes in a VCS cluster, in addition to the
switch type (SWBD) number and IPv4 and IPv6 virtual IP addresses.
Usage Guidelines None
Examples
switch# show rbridge-id
RBRIDGE SWBD
ID NUMBER V4 V6
-------------------------
154 95 - -
See Also rbridge-id