Threshold-monitor security – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1354

1316

Network OS Command Reference

53-1003115-01

threshold-monitor security

Configures monitoring of security parameters, such as telnet and login violations.

Synopsis

threshold-monitor security {[apply policy_name | pause | policy policy_name] area
[login-violation
[alert

lowthresh-action [all | email none | raslog] |

none | raslog]] |

threshold

telnet-violation
[alert

lowthresh-action [all | email none | raslog] |

none | raslog]] |

threshold

[buffer | high-threshold | low-threshold | timebase [day | hour | minute | none]]]]}

no threshold-monitor security

Operands

apply

Applies a custom policy that has been created by the policy operand.

policy_name

Name of a custom policy configuration created by the policy operand.

pause

Pauses monitoring.

policy

Specifies a policy name for monitoring by means of custom settings, rather
than default settings. A policy name is required before additional
configurations can be made. This operation is not supported from a
secondary node.

policy_name

Name of a custom policy configuration that can be saved and applied by
means of the apply operand.

area

Enables policy configuration.

Enables monitoring of login violations.

alert

Specifies whether an alert is sent when a threshold value is either above or
below a threshold trigger.

above

Enables setting a value for highthresh-action, which specifies the action to
be taken when a high threshold is exceeded.

below

Enables setting a value for highthresh-action and lowthresh-action, which
specifies the action to be taken when a low threshold is exceeded.

all

Specifies that email and RASLog messaging are used, and that Port
Fencing is applied in the case of highthresh-action only.

all

Specifies that email and RASLog messaging are used.

Specifies that an email message is sent.