Brocade Network OS Command Reference v4.1.0 - Manual (Page 712)

674 Network OS Command Reference
53-1003115-01
sflow collector
2
sflow collector
Identifies the sFlow collectors to which sFlow datagrams are forwarded.
Synopsis sflow collector [IPv4 address | IPv6 address]
no sflow collector [IPv4 address | IPv6 address]
Operands IPv4 address Specifies an IPv4 address in dotted-decimal format for the collector.
IPv6 address Specifies an IPv6 address for the collector.
Defaults None
Command Modes Global configuration mode
Description Use this command to identify the sFlow collectors to which sFlow datagrams are forwarded.
Usage Guidelines You can only specify up to five sFlow collectors.
Enter no sflow collector [IPv4 address | IPv6 address] to reset the specified collector address to a
null value.
Examples To identify the sFlow collectors for anIPv4 address to which sFlow datagrams are forwarded:
switch(config)# sflow collector 192.10.138.176
To identify the sFlow collectors for an IPv6 address and port to which sFlow datagrams are
forwarded:
switch(config)# sflow collector 3ff3:1900:4545:3:200:f8ff:fe21:67cf : 6343
See Also None