Clear counters interface – Brocade Network OS Command Reference v4.1.0 User Manual
Page 135
Network OS Command Reference
97
53-1003115-01
clear counters interface
2
clear counters interface
Clears the IP counter statistics on a specified interface on the switch.
Synopsis
clear counters interface {fcoe {vn-number/rbridge-id/port |
all}| fibrechannel {rbridge-id/slot/port} | port-channel number |
[fortygigabitethernet {rbridge-id/slot/port |all} gigabitethernet {rbridge-id/slot/port} |
tengigabitethernet {rbridge-id/slot/port} |vlan {vlan_id}}
Operands
interface
Specifies the use of the fcoe, port-channel, fibrechannel,
fortygigabitethernet, gigabitethernet, tengigabitethernet, or vlan keyword.
fcoe vn-number/rbridge-id/port
Specifies the FCOE interface name.
vn-number
Specifies the VN number for FCoE.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
port
Specifies a valid port number.
all
Clears counters for all FCOE interfaces.
fibrechannel rbridge-id/slot/port
Specifies a valid Fibre Channel interface.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
port-channel number
Specifies the interface is a port-channel. The number of available channels
range from 1 through 6144.