Show running-config cee-map – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1039

Network OS Command Reference

1001

53-1003115-01

show running-config cee-map

Displays the Converged Enhanced Ethernet (CEE) map.

Synopsis

show running-config cee-map [precedence | priority-group-table [pgid]| priority-table | remap
{fabric-priority | lossless-priority}]

Operands

precedence

Displays only the precedence of the default CEE map.

priority-group-table

Without a specified priority group ID, displays the priority group table for
each priority group ID.

pgid

Specifies one priority group ID.

priority-table

Displays the configured priority table map.

remap fabric-priority Displays the fabric priority for the Brocade VCS Fabric QoS.

remap lossless-priority Displays the lossless priority for the Brocade VCS Fabric QoS.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display properties of the configured CEE map. Without parameters, the
command displays the precedence of the default CEE map, priority group table for each priority
group ID, the configured priority table map, and the fabric priority and lossless priority for the
Brocade VCS Fabric QoS.

Usage Guidelines

None

Examples

To display the CEE map:

switch(config)# show running-config cee-map

cee-map default

precedence 1

priority-group-table 1 weight 40 pfc on

priority-group-table 15.0 pfc off

priority-group-table 15.1 pfc off

priority-group-table 15.2 pfc off

priority-group-table 15.3 pfc off

priority-group-table 15.4 pfc off

priority-group-table 15.5 pfc off

priority-group-table 15.6 pfc off

priority-group-table 15.7 pfc off

priority-group-table 2 weight 60 pfc off

priority-table 2 2 2 1 2 2 2 15.0

remap fabric-priority priority 0

remap lossless-prioirty priority 0