Brocade Network OS Command Reference v4.1.0 - Manual (Page 250)

212 Network OS Command Reference
53-1003115-01
description (interfaces)
2
description (interfaces)
Describes the interface.
Synopsis description line
no description
Operands line Specifies characters describing the interface. The string must be between
1 and 63 ASCII characters in length.
Defaults None
Command Modes Interface subtype configuration mode
Description Use this command to specify a string that contains the description of a specific interface.
Usage Guidelines Enter no description to remove the interface description.
Examples To set the string describing internal 10-gigabit Ethernet interface 101/0/1:
switch(config)# interface tengigabitethernet 101/0/1
switch(conf-if-te-101/0/1)# description converged_101
See Also interface, interface ve