Brocade Network OS Command Reference v4.1.0 - Manual (Page 762)

724 Network OS Command Reference
53-1003115-01
show debug vrrp
2
show debug vrrp
Displays debug parameters.
Synopsis show debug vrrp
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the status of VRRP debugging flags on the switch.
Usage Guidelines This command is for VRRP and VRRP-E. You can modify or redirect the displayed information by
using the default Linux tokens (|, >).
Examples If you run this command and the debug parameter has already been set to debug all VRRP events,
the following is displayed:
switch# show debug vrrp
VRRP event debugging is on
See Also None