Brocade Network OS Command Reference v4.1.0 - Manual (Page 914)

876 Network OS Command Reference
53-1003115-01
show ip ospf database
2
show ip ospf database
Shows database information.
Synopsis show ip ospf database [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id {rbridge-id | all}]
show ip ospf database database-summary [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id
{rbridge-id | all}]
show ip ospf database external-link-state [advertise index | extensive |link-state-id lid |
router-id routerid | sequence-number num] [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id
{rbridge-id | all}]
show ip ospf database link-state [advertise index | asbr {asbrid | adv-router rid} | extensive |
link-state-id lid | network {netid | adv-router rid} | nssa {nsaaid | adv-router rid} |
router [{routerid| adv-router rid} | router-id routerid | self-originate | sequence-number num
|summary {lid | adv-router rid}]
Operands database-summary Displays how many link state advertisements (LSAs) of each type exist for
each area, as well as total number of LSAs.
external-link-state Displays information by external link state, based on the following
parameters:
advertise index Displays the hexadecimal data in the specified LSA packet. The index
parameter identifies the LSA packet by its position in the router’s External
LSA table. To determine an LSA packet’s position in the table, enter the
show ip ospf external-link-state command.
extensive Displays LSAs in decrypt format. Do not use this parameter in combination
with other display parameters because the entire database is displayed.
link-state-id lid Displays external LSAs for the LSA source that you specify.
router-id routerid Displays external LSAs for the advertising router that you specify.
sequence-number num
Displays the External LSA entries for the hexadecimal LSA sequence
number that you specify.
link-state Displays the link state, based on the following parameters:
advertise index Displays the hexadecimal data in the specified LSA packet. The index
parameter identifies the LSA packet by its position in the router’s
external-LSA table. To determine an LSA packet’s position in the table,
enter the show ip ospf external-link-state command.
asbr Displays autonomous system boundary router (ASBR) LSAs.
extensive Displays LSAs in decrypt format. Do not use this parameter in combination
with other display parameters because the entire database is displayed.
link-state-id lid Displays LSAs for the LSA source that you specify.
network Displays either all network LSAs or the LSAs for a network that you specify.
nssa Displays either all NSSA LSAs or the LSAs for a not-so-stubby area (NSSA)
that you specify.
router Displays LSAs by router link.