Brocade Network OS Command Reference v4.1.0 - Manual (Page 749)

Network OS Command Reference 711
53-1003115-01
show config snapshot
2
show config snapshot
Displays the snapshots present on the switch.
Synopsis show config snapshot [rbridge-id {rbridge-id | all }] [snapshot-id]
Operands all Displays all snapshot information.
rbridge-id Displays snapshots for the specified RBridge.
snapshot-id Specifies the name of the snapshot that has been captured. This can be
any combination of characters and numbers. The range is from 1 through
50.
Defaults This command has no defaults.
Command Modes Privileged EXEC mode
Description Use this command to display the snapshots present on the switch.
Usage Guidelines A maximum of four snapshots for each RBridge ID can be stored on the switch.
Examples None
See Also copy snapshot (logical chassis cluster mode)