Brocade Network OS Command Reference v4.1.0 - Manual (Page 772)

734 Network OS Command Reference
53-1003115-01
show diag post results
2
show diag post results
Displays either the brief results or detailed information of the power-on self-test (POST) executed
on the switch.
Synopsis show diag post results {brief | detailed} [rbridge-id rbridge-id] [slot slot-id]
Operands brief | detailed Specifies whether the POST passed or failed (brief) or displays detailed
status with the register dump when a POST fails (detailed).
rbridge-id Specifies the RBridge ID of the switch.
slot slot_id Specifies the slot ID. This is mandatory for slot-based systems only.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display either the brief results or details of the last diagnostic POST that was
executed.
Usage Guidelines None
Examples To display brief POST results (whether the POST passed or failed):
switch# show diag post results brief slot L4
POST1:Slot L4 turboramtest PASSED (exit_status 0).
POST1:Slot L4 Script PASSED with exit_status of 0 Thu Jan 1 00:04:36 GMT 1970 took
(0:0:47)
POST2:Slot L4 portloopbacktest PASSED (exit_status 0).
POST2:Slot L4 prbstest PASSED (exit_status 0).
POST2:Slot L4 Script PASSED with exit_status of 0 Thu Jan 1 00:05:52 GMT 1970 took
(0:1:15)
rbridgeId 1
switch# show diag post results detailed slot S1
POST1:Slot S1 Started running Thu Jan 1 00:02:46 GMT 1970
POST1:Slot S1 Running diagclearerror
POST1:Slot S1 Running diagsetup
POST1:Slot S1 Test #1 - Running turboramtest
Running turboramtest...
:
<..cut..>
:
POST1:Slot S1 ********** Slot S1 POST Summary **********
POST1:Slot S1 Completed 1 Diagnostic test:
POST1:Slot S1 Script PASSED with exit_status of 0 Thu Jan 1 00:02:53 GMT 1970 took
(0:0:7)
POST2:Slot S1 Started running Thu Jan 1 00:02:58 GMT 1970
POST2:Slot S1 Running diagclearerror
POST2:Slot S1 Test #1 - Running portloopbacktest
Running portloopbacktest...
:
<..cut..>
:
POST2: ********** Slot S1 POST Summary **********
POST2:Slot S1 Completed 2 Diagnostic test:
POST2:Slot S1 Script PASSED with exit_status of 0 Thu Jan 1 00:03:35 GMT 1970 took
(0:0:37)