beautypg.com

Ip mtu – Brocade Network OS Command Reference v4.1.0 User Manual

Page 406

background image

368

Network OS Command Reference

53-1003115-01

ip mtu

2

ip mtu

Sets the MTU.

Synopsis

ip mtu size

no ip mtu

Operands

size

Specifies the size of the maximum transmission unit (MTU) of an interface.

Defaults

MTU size is 1500 bytes.

Command Modes

Interface subtype configuration mode

Description

Use this command to specify the MTU on a specific interface.

Usage Guidelines

The entire fabric acts like a single switch. Therefore, MTU is applicable only on edge ports and not
on an ISL.

The allowed MTU size is from 576 to 9018 bytes.

Enter no ip mtu to reset the MTU size to the default.

Examples

To set the MTU size to 2000 bytes on a specific 10-gigabit Ethernet interface:

switch(config)# interface tengigabitethernet 178/0/9

switch(conf-if-te-178/0/9)# ip mtu 2000

See Also

interface