Brocade Network OS Command Reference v4.1.0 - Manual (Page 1044)

1006 Network OS Command Reference
53-1003115-01
show running-config fabric route mcast
2
show running-config fabric route mcast
Displays fabric route multicast configuration information.
Synopsis show running-config fabric route mcast {rbridge-id rbridge-id | priority}
Operands rbridge-id rbridge-id Specifies the RBridge ID.
priority Displays the priority value.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display fabric route multicast configuration information.
Usage Guidelines The configuration currently effective on the switch is referred to as the running configuration. Any
configuration change you make while the switch is online is made to the running configuration.
Examples These examples display fabric route multicast configuration information:
switch# show running-config fabric route mcast
fabric route mcast rbridge-id 2
switch# show running-config fabric route mcast rbridge-id 2 priority
fabric route mcast rbridge-id 2
priority 1
See Also fabric route mcast, show fabric route multicast