Debug lldp packet – Brocade Network OS Command Reference v4.1.0 User Manual
Page 232
194
Network OS Command Reference
53-1003115-01
debug lldp packet
2
debug lldp packet
Enables debugging for the Link Layer Discovery Protocol (LLDP).
Synopsis
debug lldp packet {all | [interface fortygigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port] [both]] | [detail
[both | rx | tx]}
no debug lldp packet {all | interface fortygigabitethernet rbridge-id/slot/port | tengigabitethernet
slot/port | gigabitethernet rbridge-id/slot/port}
Operands
all
Turns on LLDP packet debugging on all interfaces.
interface
Use this parameter to specify the interface to be monitored.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id
Specifies the RBridge ID. This is not valid in standalone mode.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
both
Turns on debugging for both transmit and receive packets.
detail
Turns on debugging with detailed information.
both
Turns on detailed debugging for both transmit and receive packets.
rx
Turns on detailed debugging for only received LLDP packets.
tx
Turns on detailed debugging for only transmitted LLDP packets.
Defaults
LLDP debugging is disabled.
Command Modes
Privileged EXEC mode
Description
Use this command to enable or disable debugging for Link Layer Discovery Protocol (LLDP).
Usage Guidelines
Enter terminal monitor to display debugging outputs on a particular cmsh session.
Enter no debug lldp packet to disable LLDP debugging.