Brocade Network OS Command Reference v4.1.0 - Manual (Page 923)

Network OS Command Reference 885
53-1003115-01
show ip ospf summary
2
show ip ospf summary
Displays summary information for all OSPF instances.
Synopsis show ip ospf summary [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id {rbridge-id | all}]
Operands vrf vrfname Specifies the name of the VRF instance. If this option is not used, details
for the default VRF are shown in the output.
rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces
specific to the selected RBridge.
all Displays the information for the physical, loopback, and SVI interfaces of all
nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display summary information for all OSPF instances.
Usage Guidelines None
Examples
switch# show ip ospf summary
Total number of OSPF instances: 1
Seq Instance Intfs Nbrs Nbrs-Full LSAs Routes
1 default-vrf 5 2 1 12 2
telnet@NetIron MLX-4 Router(config-ospf-router)#show ip ospf border-routers
router ID router type next hop router outgoing interface Area
1 1.0.0.1 ABR 22.22.22.2 2/2 7
1 1.0.0.2 ABR 22.22.22.2 2/2 7
1 1.0.0.1 ASBR 22.22.22.2 2/2 7
1 1.0.0.2 ASBR 22.22.22.2 2/2 7
See Also None