Brocade Network OS Command Reference v4.1.0 - Manual (Page 934)

896 Network OS Command Reference
53-1003115-01
show ip pim rp-set
2
show ip pim rp-set
Displays the Rendezvous Point (RP) set list.
Synopsis show ip pim rp-set [rbridge-id rbridge-id]
Operands rbridge-id rbridge-id Specifies the RBridge ID.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information regarding all RPs that Protocol Independent
Multicast (PIM) perceives. The RPs may be either statically or dynamically learned.
Usage Guidelines None
Examples A typical output for this command.
switch# show ip pim rp-set
Static RP
---------
Static RP count: 1
RP: 22.22.22.22
Number of group prefixes Learnt from BSR: 1
Group prefix = 231.0.0.0/4 # RPs expected: 1
# RPs received: 1
RP 1: 33.33.33.33 priority=0 age=10 holdtime=150
switch#
See Also router pim, show ip pim bsr, show ip pim group, show ip pim neighbor, show ip pim rpf,
show ip pim rp-hash, show ip pim rp-map, show ip pim-sparse, show ip pim traffic,
show ip pim traffic, show ip pim traffic