Brocade Network OS Command Reference v4.1.0 - Manual (Page 251)

Network OS Command Reference 213
53-1003115-01
description (LLDP)
2
description (LLDP)
Specifies a string that contains the LLDP description.
Synopsis description line
no description
Operands line Characters describing LLDP. The string must be between 1 and 50 ASCII
characters in length.
Defaults None
Command Modes Protocol LLDP configuration mode
Description Use this command to specify the description of the LLDP.
Usage Guidelines Enter no description to remove the LLDP description.
Examples To set the strings describing LLDP:
switch(conf-lldp)# description Brocade-LLDP
See Also None