Brocade Network OS Command Reference v4.1.0 - Manual (Page 1047)

Network OS Command Reference 1009
53-1003115-01
show running-config hardware connector
2
show running-config hardware connector
Displays the SFP configurations in the running-config.
Synopsis show running-config hardware connector
Operands None
Defaults Displays information for the local switch.
Command Modes Privileged EXEC mode
Description Use this command to display the SFP configuration for the specified switches.
Usage Guidelines This command is supported only on the local switch.
Examples To display the SFP configuration on the local switch:
switch# show running-config hardware connector
hardware
connector 0/1
no sfp breakout
!
connector 0/2
sfp breakout
See Also clear support, copy support, show support, sfp breakout