Brocade Network OS Command Reference v4.1.0 User Manual

Page 802

764

Network OS Command Reference

53-1003115-01

show fabric islports

Usage Guidelines

This command is not available in standalone mode. If this command is executed without
operands, it displays the ISL information of the local RBridge.

The show fabric family of commands display neighbor and local port information when connected
to a down-level RBridge.

This command displays ISL details, including the breakout index of the interface if breakout mode
is configured on the source or neighbor interface.

Examples

To display information for all ISL ports in the core switch:

switch# show fabric islports

Name: sw0

Type: 96.5

State: Online

Role: Fabric Principal

VCS Id: 1

Config Mode:Local-Only

Rbridge-id: 23

WWN: 10:00:00:05:33:d1:3a:ac

FCF MAC: 00:05:33:d1:3a:ac

Index Interface State Operational State
===================================================================
0 Fi 23/0/1 Up ISL (protocol incomplete)
1 Fi 23/0/2 Up F-Port
2 Fi 23/0/3 Up F-Port
3 Fi 23/0/4 Up F-Port
4 Fi 23/0/5 Up Loopback-> Fi 23/0/5
5 Fi 23/0/6 Down
6 Fi 23/0/7 Down
7 Fi 23/0/8 Down
8 Te 23/0/1 Up ISL segmented,(ESC mismatch, Config Mode)(Trunk Primary)
9 Te 23/0/2 Down
10 Te 23/0/3 Down
11 Te 23/0/4 Down
12 Te 23/0/5 Down
13 Te 23/0/6 Down
14 Te 23/0/7 Down
15 Te 23/0/8 Down
16 Te 23/0/9 Down
17 Te 23/0/10 Down
18 Te 23/0/11 Down
19 Te 23/0/12 Down
20 Te 23/0/13 Down
21 Te 23/0/14 Down
22 Te 23/0/15 Down
23 Te 23/0/16 Down
24 Te 23/0/17 Down
25 Te 23/0/18 Down
26 Te 23/0/19 Down
27 Te 23/0/20 Down
28 Te 23/0/21 Down
29 Te 23/0/22 Down
30 Te 23/0/23 Down
31 Te 23/0/24 Down

No VCS Fabric License

Brocade VCS Fabric license is not enabled. For more than 2
nodes in the cluster VCS fabric license is mandatory.

ESC Fabric Distribution Service Conflict

FDS state is different.

Zoning FDS Configuration Conflict

FDS zoning configuration is different.

Disabled port reasons (Continued)

Number

Disabled Reasons

Explanation