Brocade Network OS Command Reference v4.1.0 - Manual (Page 736)

698 Network OS Command Reference
53-1003115-01
show cee maps
2
show cee maps
Displays information on the defined CEE maps.
Synopsis show cee maps default
Operands None
Defaults The only map name allowed is “default.”
Command Modes Privileged EXEC mode
Description Use this command to display information on the CEE map. The configuration state is displayed
with a list of all of the Layer 2 interfaces bound to the CEE map.
Usage Guidelines Network OS v4.1.0 only allows the CEE map named “default.”
Examples To view the CEE map:
switch0# show cee maps
CEE Map 'default'
Precedence: 1
Remap Fabric-Priority to Priority 0
Remap Lossless-Priority to Priority 0
Priority Group Table
1: Weight 40, PFC Enabled, BW% 40
2: Weight 40, PFC Disabled, BW% 40
3: Weight 20, PFC Disabled, BW% 20
15.0: PFC Disabled
15.1: PFC Disabled
15.2: PFC Disabled
15.3: PFC Disabled
15.4: PFC Disabled
15.5: PFC Disabled
15.6: PFC Disabled
15.7: PFC Disabled
Priority Table
CoS: 0 1 2 3 4 5 6 7
----------------------------------------
PGID: 2 2 3 1 2 2 2 15.0
See Also cee, cee-map (configuration)