Brocade Network OS Command Reference v4.1.0 - Manual (Page 1006)

968 Network OS Command Reference
53-1003115-01
show qos maps dscp-cos
2
show qos maps dscp-cos
Displays configured DSCP-CoS maps.
Synopsis show qos maps dscp-cos
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display configured QoS DSCP-CoS maps.
Usage Guidelines None
Examples To display information on defined QoS DSCP-CoS maps and application on interfaces.
sw0# show qos maps dscp-cos
Dscp-to-CoS map 'test' (dscp= d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 00 03 07 03 07 03 07 03 07 01
1 : 01 05 06 05 06 05 06 05 06 02
2 : 02 02 02 02 03 03 03 03 03 03
3 : 03 03 04 04 04 04 04 04 04 04
4 : 05 05 05 05 05 05 05 05 06 06
5 : 06 06 06 06 06 06 07 07 07 07
6 : 07 07 07 07
Enabled on the following interfaces:
Te 16/2/2
This information relates to the following map configuration applied to interface 16/2/2:
qos map dscp-mutation test
mark 1,3,5,7 to 3
mark 11,13,15,17 to 5
mark 12,14,16,18 to 6
mark 2,4,6,8 to 7
See Also qos map dscp-cos