beautypg.com

Brocade Network OS Command Reference v4.1.0 User Manual

Page 1052

background image

1014

Network OS Command Reference

53-1003115-01

show running-config interface fortygigabitethernet bpdu-drop

2

show running-config interface
fortygigabitethernet bpdu-drop

Displays the BPDU drop status of a 40-gigabit Ethernet interface.

Synopsis

show running-config interface fortygigabitethernet [rbridge-id/slot/port] bpdu-drop [enable]

Operands

rbridge-id

Specifies a switch by its RBridge ID.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

enable

Displays the drop status of STP/MSTP/RSTP and PVST+/R-PVST+ BPDUs.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display information about dropped BPDUs on the specified Ethernet
interface.

Usage Guidelines

STP, RSTP, or MSTP must be configured.

Brocade Network OS v4.1.0 supports PVST+ and R-PVST+only. The PVST and R-PVST protocols are
proprietary to Cisco and are not supported.

Examples

To display BPDU drop status information for a specific 40-gigabit Ethernet port:

switch# show running-config interface fortygigabitethernet 1/0/49 bpdu-drop

See Also

interface