Brocade Network OS Command Reference v4.1.0 - Manual (Page 1071)

Network OS Command Reference 1033
53-1003115-01
show running-config interface fortygigabitethernet udld
2
show running-config interface fortygigabitethernet udld
Displays Unidirectional Link Detection Protocol (UDLD) configuration information for a 40-gigabit
Ethernet interface.
Synopsis show running-config interface fortygigabitethernet [rbridge-id/slot/port] udld enable
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
enable Indicates whether UDLD is enabled on the interface.
Defaults This command has no defaults.
Command Modes Privileged EXEC mode
Description Use this command to display Unidirectional Link Detection Protocol (UDLD) configuration
information for the specified interface.
Usage Guidelines None
Examples None
See Also None