Brocade Network OS Command Reference v4.1.0 - Manual (Page 1216)

1178 Network OS Command Reference
53-1003115-01
show ssh server status
2
show ssh server status
Displays the current Secure Shell (SSH) server key-exchange status.
Synopsis show ssh server status [rbridge-id {rbridge-id | all}]
Operands rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
all Specifies all identifiers for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the current status of SSH server.
Usage Guidelines None
Examples Standalone mode
When SSH server is enabled:
switch# show ssh server status
Telnet server status: Enabled
When SSH server key-exchange method is configured to DH Group 14:
switch# show ssh server status
SSH Kex Exchange Algorithm: DH Group 14
When SSH server key-exchange method is restored to default:
switch# show ssh server status
VCS mode
When SSH server is disabled in rbridge-id 3:
switch# show ssh server status rbridge-id 3
rbridge-id 3 SSH server status: Enabled
switch#
When SSH server key-exchange method is configured to DH Group 14:
switch# show ssh server status rbridge-id 3
rbridge-id 3
SSH Kex Exchange Algorithm: DH Group 14
When SSH Server Key-exchange method is restored to default
switch# show ssh server status rbridge-id 3
rbridge-id 3
See Also ssh server shutdown, show telnet server status, ssh