Brocade Network OS Command Reference v4.1.0 - Manual (Page 1081)

Network OS Command Reference 1043
53-1003115-01
show running-config interface gigabitethernet mac
2
show running-config interface gigabitethernet mac
Displays configured MAC parameters for a 1-gigabit Ethernet interface.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] mac [access-group]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
access-group Displays MAC ACLs configured for the specified interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display configured MAC parameters for the specified interface.
Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples None
See Also mac access-group