beautypg.com

Show ip bgp neighbors received – Brocade Network OS Command Reference v4.1.0 User Manual

Page 875

background image

Network OS Command Reference

837

53-1003115-01

show ip bgp neighbors received

2

show ip bgp neighbors received

Displays Outbound Route Filters (ORFs) received from BGP4 neighbors of the device.

Synopsis

show ip bgp neighbors ip-addr received [extended-community | prefix-filter] [rbridge-id rbridge-id]

Operands

ip-addr

IPv4 address of a neighbor in dotted-decimal notation.

extended-community Displays the results for ORFs that use the BGP Extended Community

Attribute.

prefix-filter

Displays the results for ORFs that are prefix-based.

rbridge-id

Enables RBridge ID mode to support VCS on individual nodes.

rbridge-id

Specifies a unique identifier for a node.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to view ORFs received from BGP4 neighbors of the device.

Usage Guidelines

None

Examples

switch# show ip bgp neighbors 10.11.12.13 received extended-community

See Also

None