Brocade Network OS Command Reference v4.1.0 - Manual (Page 205)

Network OS Command Reference 167
53-1003115-01
cos-mutation
2
cos-mutation
Specifies the mutation-map to be used on the port.
Synopsis cos-mutation map_name
Operands map_name The user-defined map-name.
Defaults None
Command Modes Policy-map configuration mode
Description Use this command to specify the mutation-map to be used on the port.
Usage Guidelines This command is allowed only for the Ingress direction.
This command can only be configured in for the class class-default command.
This command can lead to a possible contradiction if there are other user-defined classes used in
the same policy-map which has a set CoS action configured. In this case, the defined CoS takes
priority over the mutation map.
Examples Typical command example:
switch(config)#policy-map mutation
switch(config-policymap)#class class-default
switch(config-policyclass)# cos-mutation plsmap
See Also class, policy-map