Brocade Network OS Command Reference v4.1.0 - Manual (Page 1228)

1190 Network OS Command Reference
53-1003115-01
show system monitor
2
show system monitor
Displays the overall status for a selected switch.
Synopsis show system monitor {rbridge-id [rbridge-id | all]}
Operands rbridge-id rbridge-id Specifies a switch using the switch’s RBridge ID.
all Reports all RBridge information.
Defaults None
Command Modes RBridge ID configuration mode
Description Use this command to display the overall switch status and the status of the contributors defined
as part of the policy.
Usage Guidelines This command is supported only on the local switch.
Examples
switch# show system monitor
** System Monitor Switch Health Report **
RBridge 128 switch status : HEALTHY
Time of Report : 2012-06-19 03:18:28
Power supplies monitor : HEALTHY
Temperatures monitor : HEALTHY
Fans monitor : HEALTHY
CID-Card monitor : HEALTHY
MM monitor : HEALTHY
LC monitor : HEALTHY
SFM monitor : HEALTHY
Flash monitor : HEALTHY
See Also show system monitor, system-monitor-mail, system-monitor