Brocade Network OS Command Reference v4.1.0 - Manual (Page 627)

Network OS Command Reference 589
53-1003115-01
qos queue multicast scheduler
2
qos queue multicast scheduler
Configures the multicast Traffic Class packet expansion scheduler policy. All multicast Traffic Class
packet expansion queues are serviced Deficit Weighted Round Robin (DWRR).
Synopsis qos queue multicast scheduler dwrr mTC0_WEIGHT mTC1_WEIGHT mTC2_WEIGHT
mTC3_WEIGHT mTC4_WEIGHT mTC5_WEIGHT mTC6_WEIGHT mTC7_WEIGHT
no qos queue multicast scheduler
Operands dwrr Configures the DWRR multicast Traffic Class packet expansion policy.
mTC0_WEIGHT Sets the DWRR weight for multicast Traffic Class 0 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
mTC1_WEIGHT Sets the DWRR weight for multicast Traffic Class 1 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
mTC2_WEIGHT Sets the DWRR weight for multicast Traffic Class 2 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
mTC3_WEIGHT Sets the DWRR weight for multicast Traffic Class 3 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
mTC4_WEIGHT Sets the DWRR weight for multicast Traffic Class 4 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
mTC5_WEIGHT Sets the DWRR weight for multicast Traffic Class 5 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
mTC6_WEIGHT Sets the DWRR weight for multicast Traffic Class 6 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
mTC7_WEIGHT Sets the DWRR weight for multicast Traffic Class 7 packet expansion in
units of bandwidth percentage. The sum of all weight values must equal
100 percent. Valid values range from 0 through 100.
Defaults The default weight value is 25 percent bandwidth for each multicast Traffic Class.
Command Modes Global configuration mode
Description Use this command to configure the multicast Traffic Class packet expansion scheduler policy. All
multicast Traffic Class packet expansion queues are serviced Deficit Weighted Round Robin
(DWRR). This multicast Traffic Class packet expansion scheduler policy is applied uniformly across
the entire system.
Usage Guidelines Enter no qos queue multicast scheduler to return the multicast Traffic Class packet expansion
scheduler to the default value.