Brocade Network OS Command Reference v4.1.0 - Manual (Page 959)

Network OS Command Reference 921
53-1003115-01
show media
2
show media
Displays the SFP information for all the interfaces present on a switch.
Synopsis show media
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display a summary of all SFP information for the switch. The output will be
several pages long.
Usage Guidelines The TX Power Field in the show media command is not supported by the 40-Gbps optics.
Examples To display all SFP information:
switch# show media
Interface Ten Gigabit Ethernet 0/1
Identifier 3 SFP
Connector 7 LC
Transceiver 0000000000000010 10_GB/s
Name id
Encoding 6
Baud Rate 103 (units 100 megabaud)
Length 9u 0 (units km)
Length 9u 0 (units 100 meters)
Length 50u 8 (units 10 meters)
Length 62.5u 3 (units 10 meters)
Length Cu 0 (units 1 meter)
Vendor Name BROCADE
Vendor OUI 42:52:4f
Vendor PN 57-0000075-01
Vendor Rev A
Wavelength 850 (units nm)
Options 001a Loss_of_Sig,Tx_Fault,Tx_Disable
BR Max 0
BR Min 0
Serial No AAA108454100431
Date Code 081108
Temperature 44 Centigrade
Voltage 3246.8 (Volts)
Current 0.002 (mAmps)
TX Power 0.1 (uWatts)
RX Power 0.1 (uWatts)
(output truncated)
See Also show media interface, show media linecard