Brocade Network OS Command Reference v4.1.0 - Manual (Page 1258)

1220 Network OS Command Reference
53-1003115-01
shutdown (STP)
2
shutdown (STP)
Disables the Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree Protocol (RSTP), the
Spanning Tree Protocol (STP), Per Vlan Spanning Tree (PVST), or Rapid PVST(RPVST) globally.
Synopsis shutdown
no shutdown
Operands None
Defaults STP is not enabled as it is not required in a loop-free topology.
Command Modes Protocol Spanning Tree configuration mode
Description Use this command to disable the all versions of STP globally.
Usage Guidelines Enter no shutdown to re-enable all versions of STP.
Examples To disable STP globally:
switch(config)# protocol spanning-tree rstp
switch(conf-rstp)# shutdown
To enable STP globally:
switch(config)# protocol spanning-tree rstp
switch(conf-rstp)# no shutdown
See Also None