Brocade Network OS Command Reference v4.1.0 - Manual (Page 907)

Network OS Command Reference 869
53-1003115-01
show ip interface loopback
2
show ip interface loopback
Displays loopback information for a Management Cluster.
Synopsis show ip interface loopback id [rbridge-id rbridge-id | all]
Operands id Displays the information for the designated loopback.
rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces
specific to a given RBridge ID.
all Displays the information for the physical, loopback, and SVI interfaces from
all nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about loopbacks for switches in a management cluster.
Usage Guidelines None
Examples None
See Also show ip interface, show ip interface ve