Brocade Network OS Command Reference v4.1.0 - Manual (Page 311)

Network OS Command Reference 273
53-1003115-01
fabric-map
2
fabric-map
Enables FCoE fabric-map configuration mode.
Synopsis fabric-map default
Operands None
Defaults None
Command Modes FCoE configuration mode
Description Use this command to enable the FCoE fabric-map configuration mode. An FCOE fabric-map is
equivalent to an FC Virtual-Fabric.
Usage Guidelines The only map name allowed is “default.”
You must be in the feature configuration mode for FCoE for this command to function.
This command does not function in standalone mode.
Examples
switch(config)# fcoe
switch(config-fcoe)# fabric-map default
switch(config-fcoe-fabric-map)#
See Also fcoe