Show process cpu – Brocade Network OS Command Reference v4.1.0 User Manual
Page 997
Network OS Command Reference
959
53-1003115-01
show process cpu
2
show process cpu
Displays information about the active processes in the switch and their corresponding CPU
utilization statistics.
Synopsis
show process cpu [rbridge-id {rbridge-id | all}] [summary] [history] [top]
Operands
rbridge-id
Executes the command on the specified switches. Valid completions for
rbridge-id include the following:
rbridge-id
Specifies the RBridge ID. This parameter is not valid in standalone mode,
and is supported only for the local RBridge ID.
all
Specifies all switches in the fabric.
summary
Displays a summary view of cpu usage.
history
Displays the history of CPU usage.
top
Displays current CPU utilization.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display information about the active processes in the switch and their
corresponding CPU utilization statistics.
Usage Guidelines
This command is supported only on the local switch.
For an explanation of process states, refer to the UNIX manual page for the ps command.
Examples
To show the information for all processes:
switch# show process cpu summary
Realtime Statistics:
Total CPU Utilization: 0% (user procs:0%, system-kernel:0%, iowait:0%)
Load Average: One minute: 0.00; Five minutes: 0.03; Fifteen minutes: 0.01
To show CPU usage information by individual processes:
switch# show process cpu
Realtime Statistics:
Total CPU Utilization: 0% (user procs:0%, system-kernel:0%, iowait:0%)
Load Average: One minute: 0.00; Five minutes: 0.02; Fifteen minutes: 0.00
Active Processes Lifetime Statistic:
PID
Process
CPU%
State
Started
17169
sh
1.00
S
13:44:27 Jul
1, 2012
2060
emd
0.80
S
21:52:27 Jun 29, 2012
2462
SWITCH_TMR_0
0.60
S
21:53:08 Jun 29, 2012
17170
imishow_proc_cp
0.50
S
13:44:27 Jul
1, 2012
2207
ospfd
0.20
S
21:52:41 Jun 29, 2012
2211
mstpd
0.20
S
21:52:41 Jun 29, 2012
2208
rtmd
0.10
S
21:52:41 Jun 29, 2012
(output truncated)
See Also